Maggot Beast

This was definitely one of my bored and need instant gratification from a scratchbuild. On a previous whim I’d bought a bag of fishing lures in the shape of maggots. You get them in bags of a couple of hundred fairly cheaply. My original intention was to just put the maggots on bases as random monster encounters. But then my imagination took over and I decided to make a maggot beast.

I decided to go for something humanoid like in appearance. The maggots were made of some form of rubbery plastic and were very easy to twist and bend. They were also springy so would need a lot of glueing to keep them in place.

To get the shape right I used some pieces of sprue that I cut up and glued together as an armature in the form of a humanoid. The size of the maggots meant I went for a larger figure, sort of troll sized. The model ended up about 6cm tall.

I just kept adding maggots to the figure until I felt the shape was as I wanted it. I had plenty of maggots so would make sure nothing of the armature could be seen. Once completed I had quite a few maggots left, so I stuck those onto bases as maggot swarms.

To paint the maggot beast I just applied my standard grey primer followed by a buff colour. I then went over the figure with a brown wash and added a pinky red as the head/mouths of the maggots.

The only thing I would have liked to have done better with this model would have been to remove the mould lines from the maggots, but the rubber material they are made from made this really hard work.

But it still made for an effectively horrific model and even gross to the touch!

One thought on “Maggot Beast”

Leave a Reply