While doing some scuplting I found myself searching for some super glue only to find lots of empty tubes and bottles. Ad as so often happens I thought I could make something with them.

Playign around with the lids I had quickly turned into a plan to make some scenery. I put the 4 slimmer lids next to the larger bottle lid, this looked just like a power station.

I cut the slim bit off the larger bottle lid. It was a bit of a mess so I grabbed a bit of foam. Cut it to size and put it in the middile of the lid.

I went for a typical power plant arrangement with the four taller lids on the edges of the larger lid. I then cut out a base from some thin mdf board I had from the back of an old picture frame.

I then sprayed the whole thing with Halfords grey primer. This made the foam look like it was coal or some other material, so I thought of ways to make that work.

Next up I started painting on different colours to make the model look used/weathered. For this I used various Khaki colours. I wanted to avoid either just grey or silver.

For the coal or whatever was in the middile building I started with a dark red and then just dripped a lighter red and then orange, and left the paint to dry on its own. This gave the impression of a furnace. The base was painted dark brown ready for an application of flock.

After sticking on some flock I felt the model colour was a bit flat so applied a black ink wash to some areas.

I kept this model very generic and avoided painting on little details so it could be used at various scales. Here is the finished model alongside a 28mm power armoured trooper, some 15mm infantry and a 6mm tank.
It took me about 20 minutes to complete this model including the time taken for the paint to dry.